• + Expand All
  • - Close All
  • Dimensions
    Blueprint side view Dynapac CC5200C VI Blueprint top view Dynapac CC5200C VI
    A. Wheelbase 3720 mm
    B1. Width, front 2180 mm
    B2. Width, with cab 2410 mm
    C. Curb clerance 815 mm
    D. Drum diameter 1300 mm
    H1. Height, with ROPS/cab 2990 mm
    K. Ground clearance 310 mm
    L. Length 5001 mm
    O. Off-set 520 mm
    R1. Turning radius, outside 7410 mm
    R2. Turning radius, inside 5460 mm
    R3. Turning radius with off-set, outside 5580 mm
    R4. Turning radius with off-set, inside 3630 mm
    S. Drum shell thickness 20 mm
    W1. Drum width 1950 mm
    W2. Width, wheel module 1610 mm
    W3. Width, tyre 322 mm
    W4. Wheel track 464 mm
    W5. Wheel spacing 128 mm
    ?. Steering angle ±32°
  • Technical Data

    Technical data

    Masses
    Max. operating mass 11700 kg
    Operating mass (incl. ROPS) 10310 kg
    Module mass (front/rear) 5900 kg/ 4410 kg
    Traction
    Speed range 0-12 km/h
    Vertical oscillation ±7°
    Theor. gradeability 35 %
    Compaction
    Wheel load 1100 kg/wheel
    Centrifugal force (high/low amplitude) 144/ 93 kN
    Nominal amplitude mm
    Nominal amplitude (high/low) 0.8/ 0.3 mm
    Static linear load 30.3 kg/cm
    Vibration frequency (high/low amplitude) 51/ 67 Hz
    Water tank volume 850 l
    Emulsion tank 200 l
    Water tank volume (front drum steering) 660 l
    Engine
    Manufacturer/Model Cummins QSF3.8 IV/T4f
    Type Water cooled turbo Diesel with After Cooler
    Rated power, SAE J1995 97 kW (130 hp ) @ 2200 rpm
    Fuel tank capacity 180 l
    DEF tank capacity 15 l
    Alternative Engine
    Manufacturer/Model Cummins QSF3.8 IIIA/T3
    Type Water cooled turbo Diesel with After Cooler
    Rated power [engine 2, rpm] rpm
    Rated power, SAE J1995 104 kW (140 hp ) @ 2200 rpm
    Fuel tank capacity 180 l
    Hydraulic system
    Driving Axial piston pump with variable displacement.
    Radial piston motors (3) with variable displacement.
    Vibration Axial piston pump with variable displacement.
    Axial piston motor with constant displacement.
    Steering Gear pump with constant displacement.
    Service brake Hydrostatic in forward and reverse lever.
    Parking/
    Emergency brake
    Failsafe multidisc brake in drum and wheel motors.