Dynapac Dynapac CC3200
  • + Expand All
  • - Close All
  • Dimensions
    Blueprint side view Dynapac CC3200 Blueprint top view Dynapac CC3200
    A. Wheelbase 3340 mm
    B. Width
    C. Curb clerance 715 mm
    D. Drum diameter 1150 mm
    H1. Height, with ROPS/cab 2990 mm
    K. Ground clearance 270 mm
    L. Length 4490 mm
    O. Off-set 335 mm
    R1. Turning radius, outside 6690 mm
    R2. Turning radius, inside 4960 mm
    R3. Turning radius with off-set, outside 5000 mm
    R4. Turning radius with off-set, inside 3270 mm
    S. Drum shell thickness 20 mm
    W. Drum width 1730 mm
    ?. Steering angle ±32°
  • Technical Data

    Technical data

    Masses
    Max. operating mass 9450 kg
    Operating mass (incl. ROPS) 8150 kg
    Module mass (front/rear) 4075 kg/ 4075 kg
    Traction
    Theor. gradeability 37 %
    Compaction
    Centrifugal force (high/low amplitude) 90 kN/ 75 kN
    Nominal amplitude (high/low) 0.7 mm/ 0.3 mm
    Static linear load (front/rear) 23.6/ 23.6 kg/cm
    Vibration frequency (high/low amplitude) 48 Hz/ 67 Hz
    Water tank volume 750 l
    Engine
    Manufacturer/Model Deutz TCD 3.6 HT T4f
    Type Water cooled turbo Diesel
    Rated power, SAE J1995 55 kW (74 hp ) @ 2200 rpm
    Rated power, SAE J1995
    Fuel tank capacity 130 l
    Alternative Engine
    Manufacturer/Model Cummins QSB 3.3 IIIA/T3
    Type Water cooled turbo Diesel
    Rated power, SAE J1995 74 kW (99 hp ) @ 2200 rpm
    Alternative Engine
    Type Water cooled turbo Diesel
    Hydraulic system
    Driving Axial piston pump with variable displacement.
    Axial piston motors (2) with variable displacement.
    Vibration Axial piston pumps (2) with variable displacement.
    Axial piston motors (2) with constant displacement.
    Steering Gear pump with constant displacement.
    Service brake Hydrostatic in forward and reverse lever.
    Parking/
    Emergency brake
    Failsafe multidisc brake in both drums.