Dynapac Dynapac CP2100
  • + Expand All
  • - Close All
  • Technical Data

    Technical data

    Masses
    Operating mass (incl. ROPS) 9840 kg
    Mass with max. ballast 21000 kg
    Mass with wet sand ballast 14150 kg
    Traction
    Speed low 9 km/h
    Speed high 23 km/h
    Speed high (EEC countries) 20 km/h
    Compaction
    Rolling width 1800 mm
    Tyre overlap 42 mm
    Wheel loads, without ballast 1350 kg
    Wheel loads, with wet sand ballast 2020 kg
    Wheel loads, with max. ballast 3000 kg
    Tyre pressure, min 250 kPa
    Tyre pressure, max 850 kPa
    Tyre type (smooth) 13/80 R20
    Water spray system, type Pressurized
    Water spray system, tank capacity 420 l
    Water spray system, spray nozzle one per tyre
    Ballast volume 3.38 m3
    Engine
    Manufacturer/Model Cummins QSB 3.8 (Tier 4F)
    Rated power, SAE J1995 89 kW (118 hp ) @ 2200 rpm
    Type Water cooled turbo Diesel
    Fuel tank capacity 210 l
    Electrical system 24V
    Alternative Engine
    Manufacturer/Model Cummins QSB 3.3 (Tier 3A)
    Rated power, SAE J1995 74 kW (99 hp ) @ 2200 rpm
    Hydraulic system
    Driving Axial piston pump with variable displacement.
    Axial piston motors (2) with variable displacement.
    Steering Axial piston pump with variable displacement.
    Service brake 2 multidisc brakes on rear wheels activated by pedal.
    Parking/
    Emergency brake
    Failsafe multidisc brakes in both gear boxes.
  • Dimensions