Dynapac Dynapac CA150PD
  • + Expand All
  • - Close All
  • Dimensions
    Blueprint side view Dynapac CA150PD Blueprint top view Dynapac CA150PD
    A. Wheelbase 2545 mm
    B1. Width, front 1852 mm
    B2. Width, rear 1676 mm
    D. Drum diameter 1219 mm
    H1. Height, with ROPS 2867 mm
    H2. Height, w/o ROPS/cab 2867 mm
    K1. Ground clearance 342 mm
    K2. Curb clearance 417 mm
    L. Length 4871 mm
    O1. Overhang, right 88 mm
    O2. Overhang, left 88 mm
    R1. Turning radius, outside
    R2. Turning radius, inside 2770 mm
    S. Drum shell thickness 22 mm
    W. Drum width 1680 mm
    ?. Steering angle ±38°
  • Technical Data

    Technical data

    Operating mass (incl. ROPS) 7500 kg
    Operating mass (incl. Cab) kg
    Module mass (front/rear) 4000 kg/ 3500 kg
    Max. operating mass 8800 kg
    Speed range (Dual/TC/AS) 0-5
    Tyre size (8 ply) 14,9x24
    Theor. gradeability 55 %
    Vertical oscillation ±9°
    Number of pads 132
    Pad area 84 cm2
    Static linear load 23.9 kg/cm
    Nominal amplitude (high/low) 1.7 mm/ 0.9 mm
    Vibration frequency (high/low amplitude) 31 Hz/ 43 Hz
    Centrifugal force (high/low amplitude) 143 kN/ 136 kN
    Manufacturer/Model Cummins QSB3.3
    Type 4 cylindre Water cooled turbo diesel
    Rated power, SAE J1995 60 kW (80 hp ) @ 2200 rpm
    Fuel tank capacity 225 l
    Hydraulic system
    Driving Axial piston pump with variable displacement
    Axial piston motor with constant displacement.
    Radial piston motor with constant displacement (D, PD).

    Vibration Axial piston pump with variable displacement.
    Axial piston motor (2) with variable displacement.
    Steering Gear pump with constant displacement.
    Service brake Hydrostatic in forward and reverse lever.
    Emergency brake
    Failsafe multidisc brake in rear axle.