Dynapac Dynapac CA702D
  • + Expand All
  • - Close All
  • Dimensions
    Blueprint side view Dynapac CA702D Blueprint top view Dynapac CA702D
    A. Wheelbase 3341 mm
    B1. Width, front 2420 mm
    B2. Width, rear 2280 mm
    D. Drum diameter 1700 mm
    H1. Height, with ROPS/cab 2982 mm
    H2. Height, w/o ROPS/cab 2206 mm
    K1. Ground clearance 405 mm
    K2. Curb clearance 483 mm
    L. Length 6515 mm
    O1. Overhang, right 155 mm
    O2. Overhang, left 135 mm
    R1. Turning radius, outside 6000 mm
    R2. Turning radius, inside 3700 mm
    S. Drum shell thickness 40 mm
    W. Drum width 2130 mm
    ?. Steering angle ±38°
  • Technical Data

    Technical data

    Operating mass (incl. Cab) 26900 kg
    Module mass (front/rear) 17200 kg/ 9700 kg
    Max. operating mass 27250 kg
    Speed range 0-11 km/h
    Tyre size (12 ply) 23,1x26
    Theor. gradeability 45 %
    Vertical oscillation ±9°
    Static linear load 80.8 kg/cm
    Nominal amplitude (high/low) 2.0 mm/ 1.3 mm
    Vibration frequency (high/low amplitude) 28 Hz/ 30 Hz
    Centrifugal force (high/low amplitude) 330 kN/ 254 kN
    Manufacturer/Model Cummins QSB6.7 T3
    Type 6 cylindre Water cooled with After Cooler
    Rated power, SAE J1995 164 kW (220.0 hp ) @ 2200 rpm
    Fuel tank capacity 320 l
    Hydraulic system
    Driving Axial piston pump with variable displacement.
    Axial piston motors with constant displacement.
    Vibration Axial piston pump with variable displacement.
    Axial piston motor (2) with variable displacement.
    Steering Gear pump with constant displacement.
    Service brake Hydrostatic in forward and reverse lever.
    Emergency brake
    Failsafe multidisc brake in drum gear box and in rear axle.