Asphalt Paver 8616C
- Leeboy
- Tracked Pavers
Find a location to get your local store information and inventory.
Find Location
Key Features & Specs
- Tier 4 Final – 111hp (82.7kW) @ 2,400 RPM
- Paving Widths Variable Up To 15’ (2.44 to 4.57 m)
- Weight (with screed) 21,420 lbs. (9,715 kg)

- + Expand All
- - Close All
-
Operators Platform:
Forward/reverse speeds incorporated into the CAN Bus electrical system
DP 700 7” (17.78 cm), 800 x 400 pixel push button color display
Control console with menu-driven diagnostics of electrical, hydraulic and engine functions, can be slid from side-to-side
Modular design facilitates easy part replacement during maintenance
Preset speed indicator to maintain consistent paver speed
Emergency stop safety switch for shutdown of paver if necessary
Two piece, grip strut, anti-slip walk board platform -
Screed Vibration:
Equipped with two hydraulic vibrators capable of producing up to 2,900 vibrations per minute each (preset at 2,400 vpm) -
Operators Controls:
Includes dual joystick electronic steer
All control switches are in a centralized control panel that can be slid to either side
Dash includes augers, screed extension, cut-offs, screed lift, hopper wings, conveyors, throttle, grade controls, steering, lights, 2-speed, horn, vibrators, and e-stop -
Screed Crown/Invert:
Equipped with a crown/invert adjustment allowing at least 2.5" (0.635 m) of crown and 1.5" (0.038 m) of valley
Includes a leveling indicator for the operator to know when the screed is level -
Additional Standard Equipment:
Gauge package (oil pressure, hour meter, electric fuel gauge, volt meter)
Back-up alarm
Operating Light package (4 night operating lights)
Vandalism protection covers
Rotating safety beacon
Horn
Washdown tank
Wired for Topcon System V grade controls
Safety hand rails and steps
Cold weather package
Oil pressure, high temperature shutdown system -
Track Drive System:
Hydrostatically powered, self-cleaning crawler type tracks consisting of drive sprocket, eight rollers (five oscillating) and hydraulically adjustable front idler
Final drive consist of torque hubs with two speeds and obtained by means of a toggle switch
Failsafe brake with anti-creep function
Track size: 14" (0.356 m) wide x 220" (5.60 m) poly
OR
Track size: 14" (0.356 m) wide x 220" (5.60 m) smooth ride poly (optional)
Paving speed: 0 to 151’ per minute (1.72 mph)
Travel speed: 0 to 355’ per minute (4.04 mph) -
Push Rollers:
Two 3.5" (89 mm) diameter rollers with sealed bearings mounted on a swivel frame
Vertically adjustable oscillating push rollers, 7” (.178 m) of height adjustment -
Screed Heat (Electric):
Legend HD Electric Screed
12K generator
Electric timer and automatic RPM control system
Environmentally safe, sealed S-curve elements in main screed and sealed, blade-style elements in extensions -
Screed End Gates:
Equipped with vertical height adjustment with tilt control and replaceable wear shoes -
Washdown System:
Electric HD pump with two hose reels with 15' X .3125" (4.572m x 8 mm) diameter hose -
Screed:
Heavy Duty Legend full free floating 96” (2.44 m) main screed with automatic screed lock
Consist of a 16.75” (.042 m) deep main screed
Constructed of .5” (12.7 mm) AR400 steel bolt-on wear plates for easy replacement -
Training, Support and Company:
Training and support manuals
Optional on-site operator training by Dealer
One-year, unlimited hours warranty against any manufacturer defects
Extended warranty available
50+ years manufacturing experience
ISO 9001 Certified
Manufactured in USA -
Steering:
Dual electronic left and right steering controls
Electronically controlled pumps are controlled by a dual joystick control station -
Hopper:
Dual 20.5” (0.52 m) heavy-duty slat feeding conveyors
Each conveyor is independent with automatic cut-offs, variable speed and conveyor bypass
Proportional speed controlled augers
Hopper size: 9 ton (8,164 kg)
Hopper height: 27.5” (0.699 m) -
Standard Variable Paving Widths:
Variable up to 15' (4.6m) -
Hydraulic System:
Variable volume hydraulic pumps for each drive
Load sense pump for auger, generator and cylinder functions
Engine mounted gear pump for conveyor functions
Hydraulic reservoir: 43.5 gallons (1164 l)
Hydraulic oil: all weather, all temperature -
Capacities:
Fuel: 34 gallons (128 l)
Hydraulic: 43.5 gallons (164 l)
Washdown tank: 7 gallons (26.5 l)
DEF tank: 5 gallons (18.9 l) -
Dimensions:
Length: 15’ 4” (4.67 m)
Width: 8’6” (2.59 m) transport
10’ (3.048 m) hopper wings down
Height: 8’ 8” (2.64 m)
Total Weight (with screed): 21,420 lbs. (9,715 kg) -
Engine:
Kubota turbocharged diesel
Tier 4 Final - 111 hp (82.77 kw) @2,400 rpm -
Hopper Wings:
Constructed of .5” (12.7 mm) thick material
Two cylinders per side
Wide radius corners allow for cleaner operation -
Paving Depths:
Hydraulically operated tow points with toggle switches to allow operation from seat or screed
Includes manual flight screws positioned on the screed
Depth: 0 to 6” (0.152 m) -
Optional Equipment:
Smooth ride HD poly pad track
Screed extension vibration
Automatic screed temperature control
Sloping screed extensions
Power crown
Heated endgates
3:1 flight screw adjusters
Walkboard extensions slide out, left and right
Truck hitch
Steering wheel drive controls, in lieu of joysticks
110volt outlet, 20 amp GFI outlet
Wiring only, grade controls (TopCon)
Dual grade control (TopCon P-32 system)
Dual grade and slope (TopCon P-32 system)
12” x 4.5” (.304 x .11 m) berm extension, left and right -
Material Augers:
Two independent, hydraulically driven, segmented augers. Operated automatically or manually
Augers are 12” (.305 m) diameter and are cast from .625” (.016 m) SAE 4140 heat treated steel
System has manual override function and automatic functions are controlled by sonic sensors (non-contracting) -
Screed Controls:
Screed controls have extensions, pile height, slope extensions, auger override, auger speed controls and tow points
Graphic instrument display -
Screed Extensions:
Two 44” (1.12 m) screed extensions, hydraulically operated
To eliminate seams, the heated extensions are adjustable and mounted flush with the main screed
Includes replaceable .375” (.009 m) by 7.38” (0.111 m) AR 400 bottom wear plate
Equipped with two vertical height adjustments and one angle of attack adjustment per extension
