Morbark 2755 Flail Chiparvestor

2755 Flail Chiparvestor

  • Morbark
  • Chiparvestors

Find Your Nearest Location

Your Preferred Store
Change location Change location
Request Quote
Key Features & Specs
Offering three-, four- or six-knife chipper disc options, the 2755 is ideal for some of your toughest jobs. A 27″ (68.58 cm) diameter chipping capacity and lift capacity of 17,200 lbs. (7,800 kg) at 10′ (3.05 m) make the 2755 one of the toughest machines for any job. Customizable options include ESPAR heating system for cold weather starts, discharge spout extension to load open vans or rail cars, debris plow in lieu of telescoping conveyor, and remote control.
  • Spreader Infeed - This unique infeed system spreads multiple stems apart, which assists with more complete bark removal.
  • Hydrostatic Controls - Flail drive is a closed loop hydraulic design with separate hydraulic systems to operate each flail drum. Each system is complete with electric tach and controls in operator’s cab.
  • Chipper Disc - Each disc is fabricated from plate steel and put through ultrasonic testing. Material certification is issued for each disc, which provides the best chipper disc in the industry.
  • Chip Quality - Units produce quality chips even in non-merchantable and juvenile timber.
  • + Expand All
  • - Close All
  • Specs - Cab and Loader

    Cab offers operator a deluxe 6-way adjustable seat, joy stick controls, combination air conditioner/heater, and emergency shut-down system. Along with, complete engine gauge panel for both power units located in cab. Hydraulic tilt-down cab for transport. Morbark 500 knuckleboom loader, 23’ (7 m) reach, 270º swing and 360º continuous rotation grapple. Lift capacity of 17,200 lb. (7,800 kg) at 10’ (3.05 m)

  • Specs - Chipper

    27” (68.58 cm) diameter chipping capacity

    83” (210.82 cm) diameter chipper disc with a three, four or six-knife configuration

    Chip sizes: 5/8”, 3/4”, 7/8”, or 1” (15.88 mm, 19 mm, 22.22 mm, 25.4 mm)

    Dirt separator, bottom discharges onto 12” (30.48 cm) diameter twig augers

    Hydraulic swivel/telescoping discharge spout

  • Specs - Options
    • Four- or six-knife chipper disc
    • Third flail drum
    • Push ram discharge in lieu of standard discharge
    • ESPAR heating system for cold weather start
    • Electric power option
    • Foot pedal loader swing for knuckleboom loader
  • Specs - General

    Length: 55’ (16.76 m)
    Height: 13’6’’ (4.11 m)
    Width: 11’11” (3.63 m)

    Gross weight: 120,960 lbs. (54,866 kg)
    Tri- axle trailer: 75,000 lb. (34,020 kg) suspension

    Engine: CAT
    Horsepower: up to 1,490 HP (1,111 kW)

    Drive (flail):  hydraulic
    Drive (chipper): belt

    Fuel capacity (tank): 500 gallons (1,892 litres)
    Hydraulic oil capacity (feed systems and loader): 300 gallons (1,135 litres)
    Hydraulic oil capacity (flail): 200 gallons (757 litres)

    11-HP (8.2 kW) air compressor

    Reversing fan

  • Specs - Flail

    Infeed opening: 27” x 55” (68.58 cm x 139.7 cm)

    Three top feed rollers mounted on yoke assemblies

    Five stationary bottom feed rollers

    Dual horizontal chain flails with patented segmented drums are equipped with eight flail chain rods

    Discharge system consisting of 60-1/2” (1.54 m) wide x 23’ (7 m) long telescoping drag chain conveyor with hydraulic drive

    Air curtain