• + Expand All
  • - Close All
  • Specs - NCL - Equipment Highlights
    • 75? (190.5 cm) diameter x 5? (12.7 cm) thick three-knife chipper disc with LH rotation
    • Hydraulic chipper hood for easy knife access
    • Four-wheel hydraulic feed system
    • Two 10?7/8? (27.62 cm) x 22? (55.88 cm) side feed wheels and one 22?¼” (56.52 cm) x 41?¾” (106.04 cm) top feed wheel and one 10?¾” (27.3 cm) x 51?¾” (131.44 cm) bottom feed wheel
    • Reversing fan
    • Dirt separator with deflector
    • Hydraulic swivel/telescoping discharge spout

  • Specs - NCL - General: NCL

    Chipping capacity: 23?(58.42 cm)
    Length: 27’4? (8.33 m)
    Height: 13’6? (4.11 m)
    Width: 10’10” (3.3 m)
    Gross weight (approx.): 45,000 lbs. (20,412 kg)
    Horsepower: up to 765 HP (570.46 kW)
    Engine: CAT
    Tandem axle trailer: 40,000 lb. (18,144 kg) suspension
    Drive: belt


  • Specs - WCL - General: WCL

    Chipping capacity: 23? (58.42 cm)
    Length: 36? (10.97 m)
    Height: 13’5? (4.09 m)
    Width: 10’6? (3.2 m)
    Gross weight (approx.): 62,200 lbs. (28,216 kg)
    Horsepower: up to 765 HP (570.46 kW)
    Engine: CAT
    Tandem axle trailer: 50,000 lb. (22,679 kg) suspension
    Drive: belt
    Fuel capacity (tank): 300 gal (1,135.62 L)
    Hydraulic oil capacity: 300 gal (1,135.62 L)


    Knives (3): 23? x 5? x ½”(58.42 cm x 12.7 cm x 1.27 cm)

    Chip sizes”: 5/8?, ¾”, 7/8?, 1? (15.88 mm, 19 mm, 22.22 mm, 25.4 mm)


  • Specs - WCL - Equipment Highlights
    • 75? (190.5 cm) diameter x 5? (12.7 cm) thick three-knife chipper disc with LH rotation
    • Hydraulic chipper hood for easy knife access
    • Four-wheel hydraulic feed system
    • Two 10?7/8? (27.62 cm) x 22? (55.88 cm) side feed wheels and one 15? (38.1 cm) x 41?¾” (106.04 cm) top feed wheel and one 10?¾” (27.3 cm) x 51?¾” (131.44 cm) bottom feed wheel
    • Enclosed weatherized operator’s cab is mounted on rubber shock absorbers and tilts hydraulically for transport and includes combination air conditioner/heater and six-way adjustable seat and joystick controls
    • Morbark 500 knuckleboom loader, 23? (7 m) reach, 180º swing and by-pass grapple, lift capacity of 17,200 lbs. (6,894.6 kg) at 10? (3.05 m)
    • Reversing fan
    • Dirt separator with deflector
    • Hydraulic swivel/telescoping discharge spout
    • 325L Caterpillar Undercarriage with 24? (600 mm) double grouser pads, 20? (50.8 cm) ground clearance
    • 11-HP (8.2 kW) air compressor
    • Light package

  • Specs - NCL - General: NCL Track

    Chipping capacity: 23? (58.42 cm)
    Length: 28’10” (8.78 m)
    Height: 11’9? (3.58 m)
    Width: 10’6? (3.2 m)
    Gross weight (approx.): 59,780 lbs. (27,116 kg)
    Horsepower: 700-875 HP (523-652 kW)
    Engine: CAT


  • Specs - NCL - Common to All Models

    Fuel capacity (tank): 300 gal (1,135.62 L)
    Hydraulic oil capacity: 200 gal (757 L)
    Knives (3): 23? x 5? x ½” (58.42 cm x 12.7 cm x 1.27 cm)
    Chip sizes”: 5/8?, ¾”, 7/8?, 1? (15.88 mm, 19 mm, 22.22 mm, 25.4 mm)


  • Specs - WCL - Options
    • Choice of PT Tech hydraulic clutch
    • Four-knife chipper disc
    • Strickland tracks
    • Espar heating system for cold-weather start
    • Electric power
    • Railcar spout for top loading
  • Specs - NCL - Options
    • Strickland NS38 Tracks or CAT 320L undercarriage
    • Choice of PT Tech hydraulic clutch
    • Four-knife chipper disc
    • Espar heating system for cold-weather start
    • 11-HP (8.2 kW) air compressor
    • Electric power
    • Light package