Morbark Model 30 Chiparvestor Whole Tree Chipper

Model 30 Chiparvestor Whole Tree Chipper

  • Morbark
  • Chiparvestors

Find Your Nearest Location

Your Preferred Store
Change location Change location
Request Quote
Key Features & Specs
The largest in the line, the Morbark Model 30 Chiparvestor is designed for power! This aggressive machine features a chipper disc that is 5″ (12.7 cm) thick and weighs 8,000 lbs. (3,628.74 kg), making it perfect for the toughest of jobs. With an 83″ (210.82 cm) disc and a four-wheel hydraulic feed wheel compression system, this machine is fully equipped to handle what you give it. Customizable options include a three- or four-knife chipper disc, tri-axle, reversing fan, track option and many more, making it ideal for any of your needs. Increase your efficiency with the optional cab and loader, which boasts a lift capacity of 20,000 lbs. (9,071.85 kg) at 10′ (3.05 m). With the optional Strickland SS40 undercarriage, the Morbark 30 WCL Track can traverse the roughest terrain.
  • Operator’s Cab Optional - Roomy, climate-controlled cabs are equipped with comfortable seats, joystick controls and full instrumentation.
  • Morbark Integrated Control Systems - This ultimate diagnostic system monitors pressures, temperatures, clutch systems and engine efficiency to maximize performance.
  • Feed System - Powerful multi-wheel feed system provides positive feed of logs and tops for excellent chip quality.
  • Chip Quality - Units produce quality chips even in non-merchantable and juvenile timber.
  • Chipper Disc - Each disc is fabricated from plate steel and put through ultrasonic testing. Material certification is issued for each disc, which provides the best chipper disc in the industry.
  • + Expand All
  • - Close All
  • Specs - 30 RXL - Options
    • PT Tech hydraulic clutch
    • Four-knife chipper disc
    • Espar heating system for cold-weather start
    • Electric power
    • Light package
    • 11-HP (8.2 kW) air compressor
  • Specs - 30 WCL Track - Equipment Highlights
    • 83” (210.82 cm) diameter x 5” (12.7 cm) thick three-knife chipper disc with LH rotation
    • Hydraulic chipper hood for easy knife access
    • Four-wheel hydraulic feed wheel compression system
    • Heavy-duty feed works drive
    • Electric warning horns activated from cab and/or ground position on both sides of machine
    • Enclosed weatherized operator’s cab lowers hydraulically for transport and includes combination air conditioner/heater and six-way adjustable seat and joystick controls
    • Morbark 500 knuckleboom loader, 23” (7 m) reach, 180º swing and by-pass grapple, lift capacity of 17,200 lbs. (6,894.6 kg) at 10” (3.05 m)
    • Reversing Fan
  • Specs - 30 NCL - Options
    • PT Tech hydraulic clutch
    • Four-knife chipper disc
    • Espar heating system for cold-weather start
    • Electric power
    • Light package
    • 11-HP (8.2 kW) air compressor
  • Specs - 30 WCL Track - Options
    • Air Compressor
    • Halogen light package
    • ESPAR heating system for cold-weather start
    • 270º hydraulic powered swivel end discharge spout
    • CAT 330L undercarriage with 700mm triple grouser pads with ground clearance of 20”(50.8 cm)
    • Infeed extension to hydraulic fold up 90º for transport
  • Specs - 30 NCL - General

    Chipping capacity: 30” (76.2 cm)
    Length: 32” (9.75 m)
    Height: 13’4” (4.06 m)
    Width: 10’4” (3.15 m)
    Gross weight (approx.): 58,000 lbs. (26,308 kg)
    Horsepower: up to 1,050 HP (782.98 kW)
    Engine: CAT
    Tandem axle trailer: 50,000 lb. (22,679 kg) suspension
    Fuel capacity (tank): 300 gal (1,135.62 L)
    Hydraulic oil capacity: 200 gal (757.08 L)
    Knives (3): 23” x 5” x ½” (58.42 cm x 12.7 cm x 1.27 cm)
    Chip sizes: 5/8”, ¾”, 7/8”, 1”, 1”¼”, 2” (15.88 mm, 19 mm, 22.22 mm, 25.4 mm, 31.75 mm, 50.8 mm)

  • Specs - 30 RXL - Equipment Highlights
    • 83” (210.82 cm) diameter x 5” (12.7 cm) thick three-knife chipper disc with LH rotation
    • Hydraulic chipper hood for easy knife access
    • 30” (76.2 cm) x 10” (3.05 m) CAT chain infeed bed
    • Three-wheel hydraulic feed system
    • Two 13” (33 cm) x 25”¾” (65.4 cm) side feed wheels and one 22”¼” (56.52 cm) x 68” (172.72 cm) top feed wheel
    • Wireless remote control with tethered back-up
    • Enclosed weatherized operator’s cab is mounted on rubber shock absorbers and tilts hydraulically for transport and includes combination air conditioner/heater and six-way adjustable seat and joystick controls
    • Morbark 1000 knuckleboom loader, 25” (7.62 m)reach, 210º swing and by-pass grapple, with lift capacity of 20,000 lbs. (9,071.85 kg) at 10” (3.05 m)
    • Dirt separator with deflector
    • Hydraulic swivel/telescoping discharge spout
    • Reversing fan
  • Specs - 30 NCL - Equipment Highlights
    • 83” (210.82 cm) diameter x 5” (12.7 cm) thick three-knife chipper disc with LH rotation
    • Hydraulic chipper hood for easy knife access
    • 30” (76.2 cm) x 10” (3.05 m) CAT chain infeed bed
    • Four-wheel hydraulic feed system
    • Two 13” (33 cm) x 25”¾” (65.4 cm) side feed wheels and one 22”¼” (56.52 cm) x 68” (172.72 cm) top feed wheel
    • Dirt separator with deflector
    • Hydraulic swivel/telescoping discharge spout
    • Reversing fan
  • Specs - 30 RXL - General

    Chipping capacity: 30” (76.2 cm)
    Length: 41” (12.5 m)
    Height: 13’6” (4.11 m)
    Width: 11” (3.35 m)
    Gross weight (approx.): 82,000 lbs. (37,195 kg)
    Horsepower: up to 1,200 HP (894.84 kW)
    Engine: CAT
    Tandem axle trailer: 50,000 lb. (22,679 kg) suspension
    Fuel capacity (tank): 400 gal (1,514.16 L)
    Hydraulic oil capacity: 300 gallons (1,135.62 L)
    Knives (3): 23” x 5” x ½” (58.42 cm x 12.7 cm x 1.27 cm)
    Chip sizes: 5/8”, ¾”, 7/8”, 1”, 1”¼”, 2” (15.88 mm, 19 mm, 22.22 mm, 25.4 mm, 31.75 mm, 50.8 mm)

  • Specs - 30 WCL Track - General

    Chipping capacity: 30” (76.2 cm)
    Length: 32’11” (10 m)
    Height: 11’11” (3.63 m)
    Width: 11’10” (3.61 m)
    Gross weight  (approx.): 94,000 lbs. (42,638 kg)
    Horsepower: up to 1,200 HP (894.84 kW)
    Engine: CAT
    Fuel capacity (tank): 400 gal (1,514.16 L)
    Hydraulic oil capacity: 300 gallons (1,135.62 L)
    Knives (3): 23” x 5” x ½” (58.42 cm x 12.7 cm x 1.27 cm)
    Chip sizes: 5/8”, ¾”, 7/8”, 1”, 1”¼”, 2” (15.88 mm, 19 mm, 22.22 mm, 25.4 mm, 31.75 mm, 50.8 mm)