• + Expand All
  • - Close All
  • Specs - Chipper Assembly

    Drum diameter: 36” (91.44 cm)
    Drum width: 34”½” (87.63 cm)
    Chipper knives (6): 11” x 7 5/16” x ¾” thick (27.94 cm x 18.57 cm x 1.9 cm)
    Counter knives (6): 11” x 6 3/8” x ½” thick (27.94 cm x 16.19 cm x 1.27 cm)
    Knives and Counter knives are Babbitt-style
    Feed drive: hydraulic


  • Specs - Discharge System

    Straight discharge chute includes hydraulically operated chip deflect with vertical and horizontal adjustment. Optionally includes a mechanically driven chip accelerator to fully load vans.


  • Specs - Options
    • MicroChipper package: to include 12-knife drum, chip accelerator and 3×3 grate system
    • Top load discharge
    • ESPAR heating system for cold-weather start
    • Chip Accelerator
    • Forestry Grate
  • Specs - Cab and Loader (optional)

    Model 180 Hydraulic Knuckleboom Loader with 18” (5.48 m) extended boom reach, turntable bearing with 310-degree swing, 2537 log grapple with 360-degree turn motor. Stationary operator’s cab and console complete with joystick controls for loader, Red Dot combination air conditioner/heater, cab-mounted MICS, engine gauge panel, emergency shut-down system, six-way adjustable swivel seat and color-tinted safety glass with steel guard.


  • Specs - Infeed System

    Infeed opening: 31” x 34” (78.74 cm x 86.36 cm)

    Infeed System consists of one 30” (76.2 cm) diameter top compression feed roll with internal drive, a 14” (35.56 cm) diameter bottom feed wheel, and a 31” wide x 11’6” (78.74 cm x 3.5 m) long live floor equipped with two strands of WDH-120 chain.


  • Specs - Remote

    Wireless remote control with a 60” (18.28 m) tethered remote back-up system for chipper operation.  Functions include forward/reverse of feed works, up and down of top feed roll, operation of chip discharge spout and throttle.


  • Specs - General

    Length NCL: 31’6” (9.6 m)
    Height NCL: 11’6” (3.5 m)
    Width NCL: 8’4” (2.54 m)

    Length WCL: 35” (10.66 m)
    Transport Height WCL: 13” (3.96 m)
    Operating Height WCL: 15’10” (4.83 m)
    Width WCL: 8’6” (2.59 m)

    Length WCL Track: 29’6” ( 8.99 m)
    Height WCL Track: 11’6” (3.5 m)
    Width WCL Track: 10’9” (3.27 m)


    Gross weight NCL: 36,500 lbs. (16,556 kg)
    Tongue weight NCL: 7,200 lbs. (3,265 kg)
    Axle weight NCL: 29,300 lbs. (13,290 kg)
    Tandem axle NCL: 36,000 lbs. (16,330 kg) leaf spring suspension

    Gross weight WCL: 39,140 lbs. (17,755 kg)
    Tongue weight WCL: 14,440 lbs. (6,550 kg)
    Axle weight WCL: 24,700 lbs. (11,205 kg)
    Tandem axle WCL: 36,000 lbs. (16,330 kg) leaf spring suspension

    Gross weight WCL Track: 57,000 lbs. (28,855 kg)


    Engine: CAT
    Horsepower: 540 HP to 765 HP (402 kW to 570 kW)


    Fuel capacity (tank): 160 gallons (605 litres)
    Hydraulic oil capacity: 80 gallons (303 litres)


    Chipping capacity: 23” (58.42 cm) diameter

    Tires: Super Singles 385/65R/22.5 20-ply

    Brakes: air

    Towing arrangement: Pintle Hitch Tongue with Skidder Plates

    11-HP (8.2 kW) air compressor with lockable enclosure

    Automatic reversing fan system

    Rear hydraulic stabilizers

    Light package