• + Expand All
  • - Close All
  • Specs - Chipper Assembly

    Drum diameter: 48? (121.92 cm)
    Drum width: 55 ½” (140.97 cm)
    Chipper knives:  (10) 11? x 7 5/16? x ¾” thick (27.94 cm x 18.57 cm x 1.9 cm)
    Counter knives:  (10) 11? x 6 3/8? x ½” thick (27.94 cm x 16.19 cm x 1.27 cm)
    Knives and Counter knives are Babbitt-style and made of A-8 modified steel
    Drum speed: 945 RPM
    Feed drive: Hydraulic


  • Specs - Cab and Loader

    Model 500 Hydraulic Knuckleboom Loader with 23? (7 m) extended boom reach, turntable bearing with 280-degree swing, 442 grapple with 360-degree turn motor. Stationary, rising cab and console, complete with joystick controls for loader, Red Dot combination air conditioner/heater, cab-mounted MICS, engine gauge panel, emergency shut-down system, six-way adjustable swivel seat, color-tinted safety glass with steel guard.


  • Specs - Options
    • ESPAR heating system for cold-weather start
    • MicroChipper configuration with chip accelerator and forestry grate
    • Top load discharge
  • Specs - Infeed System

    Infeed opening 52? x 45? (132.08 cm x 114.3 cm)

    Infeed System consists of one 34? (86.36 cm) diameter top compression feed roll with internal drive and a 50? (127 cm) wide x 14? (4.27 m) long live floor equipped with four strands of WDH-120 chain in a staggered configuration

  • Specs - Discharge System

    Straight discharge chute includes hydraulically operated chip deflect with vertical and horizontal adjustment, clean-out door, and an additional 18? top section.


  • Specs - General

    Length (transport) NCL: 40’9? (12.42 m)
    Height NCL: 11’10” (3.61 m)
    Width NCL: 10’2? (3.1 m)

    Length (transport) NCL Track: 36’4? (11.07 m)
    Height NCL Track: 11’11” (3.63 m)
    Width NCL Track: 11’7? (3.53 m)

    Length (transport) WCL Track: 36’4? (11.07 m)
    Height WCL Track: 12’5? (3.78 m)
    Width WCL Track: 12? (3.66 m)


    Gross weight NCL: 68,000 lbs. (30,845 kg)
    Axle weight NCL: 30,000 lbs. (13,607 kg)
    Tongue weight NCL: 38,000 lbs. (17,263 kg)
    Tandem-axle trailer NCL: 44,000 lbs. (19,960 kg) suspension

    Gross weight NCL Track: 88,000 lbs. (39,920 kg)

    Gross weight WCL Track: 104,000 lbs. (47,175 kg)


    Engine: CAT
    Horsepower: 1050 HP (783 kW)


    Fuel capacity (tank): 400 gallons (1,514 litres)
    Hydraulic oil capacity: 285 gallons (1,078 litres)


    Brakes: air

    Towing arrangement: fifth wheel

    Dust suppression system

    Hydraulically operated debris containment door

    330L or 330EL Caterpillar undercarriage (optional)

    Automatic reversing fan system

    Rear hydraulic stabilizers

    Light package

    11 HP (8.2 kW) air compressor with lockable enclosure

     


  • Specs - Remote

    Wireless remote control with a 60? (18.28 m) tethered remote back-up system for chipper operation. Functions include forward/reverse of feed works, up and down of top feed roll, operation of chip discharge chute and throttle.