SW 422 MC
- Binding Agent Spreaders
Find a location to get your local store information and inventory.
Your Preferred StoreChange location Change location
Precise and powerful binding agent spreading
STREUMASTER binding agent spreaders are suitable both for spreading large quantities of binding agents during soil stabilization and for spreading small quantities of binding agents with maximum precision during cold recycling.
The MC series of mobile binding agent spreaders are mounted on a carrier vehicle and are therefore perfect for use in difficult off-road conditions.
With a maximum spreading width of 2,360 mm, the models in the TC and MC series are capable of spreading quantities of up to 60 l / m².
In combination with products from the WIRTGEN GROUP, STREUMASTER binding agent spreaders cover the complete cycle in road construction and earthworks.
|Built-up empty weight||11,023 lbs|
|Required torque of auxiliary drive||400 Nm|
|Container capacity||777 cu ft|
|Working width / Partial widths||7 ft 9 in ( 2 ft 8 in / 2 ft 4 in / 2 ft 8 in)|
|Spread rate at 2 km/h (DN 230-10 spreading unit)||3 – 25 lbs / yd2|
|Required speed of the truck’s auxiliary drive for max. hydraulic power||1,250 RPM|
|Required power output of the truck’s auxiliary drive||50 kW|
|Minimum speed of the truck’s auxiliary drive||500 RPM|
|Spread rate at 2 km/h (DN 230-20 spreading unit)||8 – 100 lbs / yd2|
|Size of filling connector / filling hose||4"|
|Spread rate at 2 km/h (DN 410-17 spreading unit)||10 – 150 lbs / yd2|
|Max. permissible speed of the truck’s auxiliary drive||2,300 RPM|