JOHN DEERE 510 P-Tier Large Excavator
Construction
- Net Power: 274 kW (367 hp)
- Max. Digging Depth: 7.77â8.27 m (25 ft. 6 in.â27 ft. 2 in.)
- Operating Weight: 50 750 kg (111,885 lb.)
| DIMENSIONS - Dig depth - 2.44m / 8'ft flat bottom, mm (ft/in) | 8140 (26 ft 8 in) |
|---|---|
| DIMENSIONS - Dig Height - Mono Boom, mm (ft/in) | 11160 (36 ft 7 in) |
| DIMENSIONS - Digging Reach - Mono Boom, mm (ft/in) | 12490 (41 ft ) |
| DIMENSIONS - Dump Height - Mono Boom, mm (ft/in) | 7770 (25 ft 6 in) |
| DIMENSIONS - Ground Clearance, mm (inches) | 740 (29) |
| DIMENSIONS - Ground Level Reach - Mono Boom, mm (ft/in) | 12280 (40 ft 3 in) |
| DIMENSIONS - Overall Undercarriage Length, mm (ft/in) | 5470 (17 ft 11 in) |
| DIMENSIONS - Overall Undercarriage Width, mm (ft/in) | 3290 (10 ft 10 in) |
| DIMENSIONS - Tailswing Radius, mm (ft/in) | 3670 (12 ft ) |
| DIMENSIONS - Track Length On Ground, mm (ft/in) | 4470 (14 ft 8 in) |
| DIMENSIONS - Transport Height - Maximum, mm (ft/in) | 3500 (11 ft 6 in) |
| DIMENSIONS - Transport Length Mono Boom, mm (ft/in) | 12010 (39 ft 5 in) |
| DRIVELINE - Displacement, ltr (Inches³) | 9 (549) |
| DRIVELINE - Engine Manufacturer | John Deere Power Tech |
| DRIVELINE - Engine Output - Net, kW (hp) | 274 (367) |
| DRIVELINE - Number Of Carrier Rollers - Each Side | 3 |
| DRIVELINE - Number Of Cylinders | 6 |
| DRIVELINE - Number Of Track Rollers - Each Side | 9 |
| DRIVELINE - Rated speed, rpm | 2000 |
| DRIVELINE - Track Shoe Width, mm (inches) | 900 (36) |
Featured Content
Production Class Equipment
Overview
The 510 P is targeted for the Site Development, or Underground contractor who demands 50MT performance with improved fuel efficiency, maximum uptime with production class levels of durability, and lower Total Cost of Ownership (“TCO”), to improve financial returns. This is achieved by the new JD9 engine with 367 net horsepower and electronic on-demand cooling fans.
Compared to the 470 P:
- Same power and performance
- 12% reduction in fuel consumption – over 1 gallon per hour based on average JDLink data
- Up to $7 per hour reduction in total cost of ownership
- 10% reduction in maintenance costs
- 16% reduction in repair costs
Central lubrication at arm tip
Internal view of central lubrication grease path
Two-piece front pipe clamping
P-Tier updates build on the proven G-Series design. Take front joint durability to new levels compared to G-Series.
- The new tophat bushing and two-sided mud and dirt (2MAD) seals have proven as much as double the joint life when digging in sandy conditions which typically reduce pin and bushing life substantially.
- Increased case-depth hardening on the pin works together with the improved bushing and seals to maximize joint life.
- Grease point at arm tip for easy greasing and extended uptime
- Better torque retention at the clamp reduces the likelihood of front hydraulic pipes moving Hydraulic lines routed on top of the boom for added protection
- Redesigned boom foot bushings improve durability
SmartGrade™ Excavator
SmartGrade™ technology is changing construction and revolutionizing the way you will run your operation. In the past, workers were prone to mistakes and required frequent grade checks to ensure the precision of their work. Now, with guidance and control to increase their speed and accuracy, operators of all skill levels can benefit from these new tools.
SmartGrade™ technology improves productivity with fewer mistakes and less downtime.
- Quickly and confidently achieve grade with fewer periodic grade checks.
- Improve accuracy and time to get to final grade for operators of all skill levels.
- Machine is equipped with elevation, eliminating the need for benchmarking or catching a laser.
- Upgrade kits allow you to adopt technology at your own pace.
No loss of investment and no need to purchase a new machine, you have precise accuracy when the time is right.
We know how over-grading, understaffing, and lack of time add up to rework. Especially given that the jobsite is never the same two days in a row. That is why our flexible grade-management tools are engineered to minimize rework. Machine monitoring and Connected Support keep you updated with machine and fleet performance to boost productivity and keep your business humming.
Eliminate Rework
- Overdig protect hydraulically limits the excavator from digging beyond the target surface reducing chances for over-excavation.
- Maintains set bucket angle for precise grading while operator controls machine
- Monitors elevation and slope information on any terrain.
- Fewer passes regardless of operator experience
Increase Efficiency
- Remote Display Access allows you to remote into the grade control monitor without physically travelling to the machine.
- Wireless data transfer allows change orders to be easily updated and deployed to machines on the jobsite.
Whatever you are up against, we have the tools to help you get the job done.
Right, rear, and left cameras with additional light-emitting diode (LED) surround lighting
Standard Right Rear and Left Camera system with additional LED surround lighting work together to provide the operator enhanced 270 degree visibility around the machine. All integrated into the main monitor.
- Work confidently with enhanced visibility even in low light conditions
- Powerful LEDs cast a pool of light surrounding 270 degrees of the sides and rear of the machine. Cameras display surroundings to the operator in the main monitor
- LED front work lights and rear camera are still standard equipment