KLEEMANN MC 100i EVO
Mobile Jaw Crushers
Equipment Specifications
| CRUSHER - Crusher weight (approx.) | 26,455 lbs |
|---|---|
| FEEDING UNIT - Feed height with extension | 12 ft 2 in |
| POWER SUPPLY UNIT - Power supply unit output | 208 hp |
| CRUSHER DISCHARGE CONVEYOR - Discharge height approx. | 10 ft 0 in |
| CRUSHER DISCHARGE CONVEYOR - Discharge height, extended, approx. | 12 ft 0 in |
| CRUSHING CAPACITY - Crushing capacity with CSS = 60 mm up to approx. | 116 US t/hr |
| VIBRATING FEEDER - Width x length | 34 in x 12 ft 11 in |
|---|---|
| FEEDING UNIT - Hopper length | 9 ft 10 in |
| CRUSHER DISCHARGE CONVEYOR - Length, extended | 33 ft 2 in |
| FEEDING UNIT - Hopper length with extension | 9 ft 2 in |
| CRUSHER - Crusher gap adjustment | Fully hydraulic |
| POWER SUPPLY UNIT - Drive concept | Diesel-direct |
| SIDE DISCHARGE CONVEYOR - Length, extended | 16 ft 5 in |
| CRUSHING CAPACITY - Crushing capacity with CSS = 85 mm up to approx. | 165 US t/hr |
| POWER SUPPLY UNIT - Rated speed | 1,500 rpm |
| SIDE DISCHARGE CONVEYOR - Length | 8 ft 10 in |
| TRANSPORT - Transport width approx. | 9 ft 10 in |
| FEEDING UNIT - Hopper width with extension | 10 ft 2 in |
| CRUSHER DISCHARGE CONVEYOR - Crusher discharge conveyor length | 28 ft 3 in |
| CRUSHER - Gap width min. | 0.8 in |
| FEEDING UNIT - Feed height | 10 ft 6 in |
| POWER SUPPLY UNIT - Generator | 85 kVA |
| SIDE DISCHARGE CONVEYOR - Discharge height | 6 ft 11 in |
| FEEDING UNIT - Max. feed size | 34 in x 21 in x 13 in |
| CRUSHER DISCHARGE CONVEYOR - Width | 39 in |
| CRUSHER - Gap width max. | 5 in |
| CRUSHER - Crusher inlet (W x D) | 950 mm x 550 mm |
| TRANSPORT - Transport length approx. | 42 ft 6 in |
| CRUSHER - Single toggle jaw crusher type | STR95-055 |
| TRANSPORT - Transport height approx. (standard value) | 10 ft 6 in |
| FEEDING UNIT - Hopper width | 6 ft 3 in |
| CRUSHER - Crusher inlet width | 37 in |
| SIDE DISCHARGE CONVEYOR - Width | 20 in |
| TRANSPORT - Transport weight of basic plant | 66,150 lbs |
| TRANSPORT - Transport weight max. configuration approx. | 78,300 lbs |
| SIDE DISCHARGE CONVEYOR - Discharge height, extended | 9 ft 10 in |
| CRUSHER - Crusher capacity | 215 hp |
| CRUSHER - Crusher drive type | direct |
| FEEDING UNIT - Hopper volume | 4.2 yd³ |
| FEEDING UNIT - Hopper volume with extension | 9.3 yd³ |
Featured Content
Jaw crushers operate according to the principle of pressure crushing. The crushed material is crushed in the wedge-shaped pit between the fixed crusher jaw and the crusher jaw articulated on an eccentric shaft. The material is crushed by the elliptic course of movement and falls down due to gravity. This occurs until the material is smaller than the set crushing gap.
For effective prescreening of the feed material, the crushing plants are equipped with an independently vibrating double-deck prescreen. Wear in the crushing chamber is thus reduced by diverting the medium grain directly onto the vibrating extractor. The screen surfaces in the upper and lower deck can be changed easily and safely.
Uniform loading is indispensable for a good product, optimum throughput and low wear.
To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilization (impact crusher).
Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilization is optimized. When the crushing chamber is free again after overloading, material transport is continued without a delay.
The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.
The crushers of the EVO line have an innovative “diesel-direct electric” drive concept and are powerful and economical at the same time.
An efficient and powerful diesel engine drives the crusher directly via a fluid coupling. The drive technology thus impresses with extremely low efficiency losses and maximum output directly at the crusher.
All secondary drives – for example, for prescreen, vibrating chutes and conveyor belts – are driven electrically. The fluid coupling guarantees high operational safety – for operator and machine.
Properties
The smallest mobile jaw crusher of the EVO line impresses with its compactness and reliability. It can be used for a huge variety of materials, offering wide-ranging possibilities for both demolition companies and contract crushers. Thanks to the diesel direct drive, the MC 100i EVO is economical in consumption.
-
Continuous Feed System (CFS) for optimal crusher feeding
-
Innovative crusher unblocking system for extremely short downtimes
-
Efficient and powerful diesel direct drive
-
Easy control via menu-guided touch panel